Contact Us



 
 

 
 


 
 



   

Popular posts from this blog

Inilah 6 Standar Gambar (JISC, NNI, DIN, SNI, ANSI, ISO) dan 10 Peralatan Dasar Gambar Teknik

Image
1.     Standar Gambar Teknik Standar gambar teknik merupakan suatu keseragaman yang telah disepakati bersama dengan tujuan untuk menghindari salah pengertian dalam komonikasi teknik. Orang-orang terkait dalam bidang gambar teknik perlu mengetahui tentang standar. Orang-orang terkait tersebut antara lain siswa pada kelompok teknologi dan industri, para perencana produk, operator mesin, operator perakitan, mekanik dan pengontrol mutu dari suatu produk/mesin. Standar gambar teknik dapat diberlakukan di dalam lingkungan perusahaan, antar perusahaan/industri di dalam suatu negara, bahkan standar gmbar teknik dapat diberlakukan pada industri antar negara yang dikenal dengan Standar Internasional atau disingkat SI. Negara-negara yang sudah membuat standar antara lain : a.     Japanese Industrial Standart (JIS)      Lebih lengkapnya : JISC b.     Nederland Normalisatie Instituut (NNI)    ...
Read more

Maintenance for CVT system

Image
A. Colar lubrication on the primary pulley Reason: If there are no lubrication, acceleration / acceleration is not smooth because of the movement on the primary sheave adapter does not work well Service Point First, lubricate the grease on the surface of the collar, then before the primary pulley mounted on a fixed, clean the excess fat on the outside of the oil seal to prevent slippage B. The inside of the starter wheel gear, starter idle gear, the drive axle of the secondary sheave Reason: Rotation is not smooth (1) point lubrication • Pulley primary shift • Collar Grease suggested: Shell Sunlight 3 ® Shell Sunlight 3: is grease versatile and is suitable for lubricating roller and plain bearing Resistance Temperature: 20 * C to 135 * C Caution: Do not touch the surface of the pulley with grease.              If pulley exposed to grease, clean with ALCOHOL C. Lubrication Torque...
Read more

Continuous variable transmission

Image
Many people use motorcycle scooter for daily activities. There for, you must know how the new scooter work! they use CVT system. Continue Variable Transmission or CVT is the transfer rate system for full automatic speed according to engine speed. This system does not use gear transmission, but the V-belt it self. CVT works fully automatic transmission, that  affected by the load and engine speed. During Idle Rotation The engine speed is not connected to the rear wheel stalled due to the rotation of the centrifugal clutch and the clutch does not touch on the clutch housing. you can read the system using this picture below . energy from engine passed to the rod that moving the front pulley. the front pulley is closing (narrow), but the rear pulley is open wide. this action give v-belt to rotate the pulley, but the wheel is still stop. During Intermediate Rotation After the idle rotation, we can accelerate the scooter. rotation...
Read more